Envelope request
Request force 0–1,500 N and draw-wire travel 0–200 mm; validate the installed displacement geometry.
PFS-KIT / SYNCHRONIZED / FORCE VS TRAVEL
Pedal Force + Travel Test Kits
Record pedal force and pedal displacement on a common timebase to compare stiffness, free play and loading/unloading behavior.
Force 0–1,500 N; travel 0–200 mm
Inspect a paired force–travel CSV →Configuration request series · ratings, drawings and supplied options confirmed in quotation.
View the force path and installation concept
FORCE VS TRAVEL / ILLUSTRATIVE
PFS-KIT / REQUEST MODEL MATRIX
Select the capacity and architecture.
| Request model | Nominal force / travel | Axes / variant | Request this configuration |
|---|---|---|---|
| PFS-KIT-1500N | Force 0–1,500 N; travel 0–200 mm | Fz + travel Portable force + travel kit | Prefill model & RFQ → |
| PFS-KIT-CAN | Force 0–1,500 N; travel 0–200 mm | Fz + travel Force + travel, CAN integration request | Prefill model & RFQ → |
| PFS-KIT-USB | Force 0–1,500 N; travel 0–200 mm | Fz + travel Force + travel, USB logging request | Prefill model & RFQ → |
Mounting request
One force plate, one anchored displacement sensor and restrained cables. Record anchor coordinates and the unloaded reference.
Signal-chain request
Two synchronized measurement channels; request common clock, sample rate, latency, trigger, filtering and raw CSV export.
Acceptance evidence
Quote sensor, mounting, displacement channel, logger, power, cable set and system calibration as explicit line items.
REVIEWED SUPPLIER REFERENCES
Force, travel and readout component references
Product and component references for configuration review. Confirm the supplied geometry, mounting and electronics in the approved drawing.
TEST PLAN / INTEGRATION
Define the installed measurement.
EV pedal-feel curves
Compare loading and unloading using aligned force and travel samples. Define the stiffness interval and preserve raw timestamps.
CAN / USB variants
PFS-KIT-CAN requests a documented CAN map / DBC and bit rate. PFS-KIT-USB requests sustained USB logging and the supported OS.
Portable vehicle deployment
Confirm battery runtime, vehicle power conditioning, start trigger and where the logger can be securely restrained.
TWO CHANNELS / ONE TIMEBASE
Specify how force and travel become a curve.
Force sensor
mV/V bridge → excitation / conditioner
Travel sensorInstalled displacement → calibrated channel
Synchronized logger
Common clock, channel latency, filter and trigger definition
Trace / CSV
Timestamp, force_N, travel_mm, load / unload branch and test reference
Request sample rate per channel, effective bandwidth and timing error separately. A fast screen refresh or peak-hold function does not establish synchronized acquisition.
INSTALLED ACCEPTANCE / EVIDENCE
Control the force path before comparing traces.
Quote sensor, mounting, displacement channel, logger, power, cable set and system calibration as explicit line items.
Request the capacity-specific drawing, sensor and readout configuration, calibration scope and acceptance procedure. Reference photographs and request targets do not replace those records.
View resources & evidence status ↗Release checklist
01Define the travel reference point and the draw-wire line of action.
02Require synchronized sampling, channel latency and trigger documentation.
03Request engineering units, raw CSV export and loading/unloading curves.
04Signed drawing revision and configuration-specific calibration evidence
PFS-KIT / ENGINEERING ANSWERS
Resolve these questions before ordering.
Does the travel logger also need the standalone handheld meter?
The standard travel request includes a dual-channel logger. The form removes the separate handheld allowance; any extra display must be quoted explicitly.
Is the sample force–travel CSV a PFS test result?
No. The downloadable example is synthetic software demonstration data with a reproducible formula. It does not validate any sensor or vehicle.
CONTINUE YOUR SELECTION
From pedal load to usable data.
ENGINEERING / REQUEST
Build the right
measurement chain.
Send your force range, pedal dimensions and acquisition requirements. Request a mounting drawing, CAD review and a complete sensor / readout quotation.
Replacing an existing sensor?
Include the exact part number, drawing revision, connector pinout and calibration requirements. Compatibility is reviewed per configuration.
Corporate procurement requests
Include your purchasing entity, PO requirements, destination and required invoice / calibration documents. Payment options, trade terms, freight and delivery are confirmed in the written quotation.