Envelope request
Requested target: Ø50.3 mm, 10–12 mm sensor height. Earlier 12–15 mm planning data is superseded; approved geometry is still required.
PFS-200 / LOW PROFILE / LOW FORCE
Clutch, Accelerator & Foot Pedal Load Cells
Capture clutch effort, accelerator resistance and industrial foot-pedal actuation without overlooking sensor weight, cable drag or the return mechanism.
100 / 250 / 500 / 1,000 N
Configuration request series · ratings, drawings and supplied options confirmed in quotation.
View the force path and installation concept
PFS-200 / REQUEST MODEL MATRIX
Select the capacity and architecture.
| Request model | Nominal force / travel | Axes / variant | Request this configuration |
|---|---|---|---|
| PFS-200-100N | 100 N / 22.5 lbf | Fz Bridge sensor | Prefill model & RFQ → |
| PFS-200-250N | 250 N / 56.2 lbf | Fz Bridge sensor | Prefill model & RFQ → |
| PFS-200-500N | 500 N / 112.4 lbf | Fz Bridge sensor | Prefill model & RFQ → |
| PFS-200-1000N | 1,000 N / 224.8 lbf | Fz Bridge sensor | Prefill model & RFQ → |
Mounting request
Request a compact removable plate. Check added mass and stack height with the actual pedal return mechanism.
Signal-chain request
Bridge, conditioned analog, USB or CAN are configuration requests. Electronics need their own supply and output definition.
Acceptance evidence
Specify low-force resolution, zero drift, cable drag, return behavior and an endurance sequence.
REVIEWED SUPPLIER REFERENCES
Review the sensing and mounting approach
Product and component references for configuration review. Confirm the supplied geometry, mounting and electronics in the approved drawing.
TEST PLAN / INTEGRATION
Define the installed measurement.
Clutch / accelerator return
Record loading and unloading, minimum useful force, pedal travel and the influence of added assembly mass.
Industrial foot-pedal endurance
Define switching force, cycle rate, expected cycle count, protection and fixture alignment. Measurement is distinct from a safety switch function.
Aircraft ground-test fixtures
Provide the rudder / toe-brake geometry and clearance. Ground-test suitability does not imply flight qualification.
INSTALLED ACCEPTANCE / EVIDENCE
Control the force path before comparing traces.
Specify low-force resolution, zero drift, cable drag, return behavior and an endurance sequence.
Request the capacity-specific drawing, sensor and readout configuration, calibration scope and acceptance procedure. Reference photographs and request targets do not replace those records.
View resources & evidence status ↗Release checklist
01Include the minimum measurable force and allowable added pedal mass.
02Check full pedal travel, return spring behavior and cable bend radius.
03For endurance tests, specify duty cycle, cycle count and temperature.
04Signed drawing revision and configuration-specific calibration evidence
PFS-200 / ENGINEERING ANSWERS
Resolve these questions before ordering.
What is the confirmed profile height?
The revised request target is 10–12 mm for the sensor body. Plate, cap and fasteners add height; a released drawing is required.
Can a passive load cell output 0–5V or CAN?
No. A passive bridge needs an amplifier or digitizer. Specify whether electronics are integrated, in-line or external.
CONTINUE YOUR SELECTION
From pedal load to usable data.
ENGINEERING / REQUEST
Build the right
measurement chain.
Send your force range, pedal dimensions and acquisition requirements. Request a mounting drawing, CAD review and a complete sensor / readout quotation.
Replacing an existing sensor?
Include the exact part number, drawing revision, connector pinout and calibration requirements. Compatibility is reviewed per configuration.
Corporate procurement requests
Include your purchasing entity, PO requirements, destination and required invoice / calibration documents. Payment options, trade terms, freight and delivery are confirmed in the written quotation.