Envelope request
100 / 150 / 200 kgf sensor-force requests correspond to about 981 / 1,471 / 1,961 N.
PFS-SIM / OEM / DRIVER TRAINING
F1 & Pro Sim Racing Brake Load Cells
Specify a stiff force-sensing module for hydraulic or elastomer brake pedals, matched to your pedal ratio and controller.
100 / 150 / 200 kgf nominal
Configuration request series · ratings, drawings and supplied options confirmed in quotation.
View the force path and installation concept
PFS-SIM / REQUEST MODEL MATRIX
Select the capacity and architecture.
| Request model | Nominal force / travel | Axes / variant | Request this configuration |
|---|---|---|---|
| PFS-SIM-100KG | 100 kgf / 980.67 N | Fz Hydraulic / elastomer integration | Prefill model & RFQ → |
| PFS-SIM-150KG | 150 kgf / 1,471.00 N | Fz Hydraulic / elastomer integration | Prefill model & RFQ → |
| PFS-SIM-200KG | 200 kgf / 1,961.33 N | Fz Hydraulic / elastomer integration | Prefill model & RFQ → |
Mounting request
Provide pedal ratio, load direction, hard-stop geometry, elastomer stroke and hydraulic layout.
Signal-chain request
Request bridge output, conditioned 0–5V, or a compatible USB HID controller. Specify pinout, excitation and calibration mapping.
Acceptance evidence
Agree on force-time history, cycle count, drift, proof loading and service life before an OEM release.
REVIEWED SUPPLIER REFERENCES
Sensor component references for pedal OEM review
Product and component references for configuration review. Confirm the supplied geometry, mounting and electronics in the approved drawing.
TEST PLAN / INTEGRATION
Define the installed measurement.
Hydraulic / elastomer integration
Rate the sensor at its own force path. Driver foot force depends on changing perpendicular lever arms and fixture compliance.
Controller integration
Provide the controller model, input range, ADC / interface requirements, supply and HID mapping. A load cell alone is not a USB device.
50 / 100 / 500+ piece programs
Request separate prototype, pilot and repeat-order quotations with drawing revision, cable set, acceptance records and delivery schedule. Prices and MOQ are quotation-specific.
INSTALLED ACCEPTANCE / EVIDENCE
Define fatigue by the actual load cycle.
Agree on force-time history, cycle count, drift, proof loading and service life before an OEM release.
Request the capacity-specific drawing, sensor and readout configuration, calibration scope and acceptance procedure. Reference photographs and request targets do not replace those records.
View resources & evidence status ↗Release checklist
01State whether capacity is measured at the sensor or at the pedal pad.
02Provide pedal ratio, elastomer stroke and mechanical stop position.
03Specify bridge output, conditioned 0–5V or USB HID controller requirements.
04Signed drawing revision and configuration-specific calibration evidence
PFS-SIM / ENGINEERING ANSWERS
Resolve these questions before ordering.
Does a 200 kgf sensor require 200 kgf at the foot pad?
No. Pedal leverage and the installed force path determine the relationship between sensor and driver force.
Is a million-cycle lifetime already validated?
No life rating is published without the actual load cycle, environment, fixture and acceptance record. Include them in the RFQ.
CONTINUE YOUR SELECTION
From pedal load to usable data.
ENGINEERING / REQUEST
Build the right
measurement chain.
Send your force range, pedal dimensions and acquisition requirements. Request a mounting drawing, CAD review and a complete sensor / readout quotation.
Replacing an existing sensor?
Include the exact part number, drawing revision, connector pinout and calibration requirements. Compatibility is reviewed per configuration.
Corporate procurement requests
Include your purchasing entity, PO requirements, destination and required invoice / calibration documents. Payment options, trade terms, freight and delivery are confirmed in the written quotation.